| POWER SOUND ELECTRONICS LIMITED |
Adds: Xi Chong Yan Cun Industrial |
| Area, Kui Chong Town, Shenzhen |
| City, Guandong, P.R.China 518119 |
Tel: +86-755-8423 5076, 8423 5093 |
8423 5316, 8423 5041 |
| Fax: +86-755-8423 5085 |
| E-mail: info@chnpowersound.com |
| E-mail:sales@chnpowersound.com |
| Http: // www.chnpowersound.com |
POWER SOUND TECHNOLOGY HOLDINGS INC.(BVI)
POWER SOUND ELECTRONICS LIMITED (HONG KONG) |
| Add: Unit 2307, 23 /F,Billion Trade |
| Centre,Kwun Tong, Kowloon, H.K. |
| POWER SOUND ELECTRONICS (JIANGSU) CO., LTD. |
| Add:Yuecheng Town, Jiangyin City, |
| Jiangsu Province, China 214404 |
| POWER SOUND ELECTRONICS (SHANDONG) CO., LTD. |
| Add:JiXing 2nd Street, High-Tech |
| Area, Weifang City, Shandong |
| Province ,China 261061 |
| KPS TECHNOLOGY CORP. (KOREA) |
| Add: Na-3216, Chung - Ang |
| Girculation Complex, #1258 |
| Gurobon - Dong, Guro-Gu, Seoul |
| 152-721, Korea |
| Tel: +82-2-2616 5188, 2616 5166 |
| Fax: +82-2-2616 8889 |
|
Technical Information
|
 |
Impedance
All speaker have a certain amount of impedance which is a frequency-sensitive function. They have typic impedance values in the rang shown in Fig1. Nominal impedance is a speaker impedance at a particular frequency, usually the one above the lowest resonant frequwncy (fo) at which the speaker has the lowest impedance.
Frequency
A practical frequency response for a speaker is the frequency range within which the speaker output will not drop by more than 10dB from the rated output sound pressure level.
Input Power
The input to a speaker is defined as follows: P=E2/Z
P: input power (W)
E: voltage across the voice coil (V)
Z: nominal impedance (¦¸)
Maximum allowable input power
Themaximum input(rms) power containing various frequency spectrums, applied
repeatedly for 1 minute every 2 minutes, on which the speaker can operate regardless of distortion without being damaged.
Output sound pressure level
Output sound pressure level is defined with an input of the rated power at 4 different frequencies applied to the speaker terminals. The output is defined as SPL which is dB relative to 2¡Á10-5Pa at the average value.
|
|